Progress PAI6000E Manuel d'utilisateur télécharger pdf (Page 27)

Warning! Risk of injury from electrical

current.

• Loose and inappropriate plug and

socket connections can make the ter-

minal overheat.

• Have the clamping connections cor-

rectly installed by a qualified electri-

cian.

• Use strain relief clamp on cable.

• In the event of single-phase or two-

phase connection, the appropriate

mains cable of type H05BB-F Tmax

90°C (or higher) must be used.

• If this appliance’s mains cable is dam-

aged, it must be replaced by a special

cable (type H05BB-F Tmax 90°C; or

higher). The latter is available from the

Customer Care Department.

A device must be provided in the electrical

installation which allows the appliance to be

disconnected from the mains at all poles with

a contact opening width of at least 3 mm.

Suitable isolation devices include line pro-

tecting cut-outs, fuses (screw type fuses are

to be removed from the holder), earth leak-

age trips and contractors.

min. 5 mm

min.

50 mm

560+1

490+1

600

progress 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Pas de commentaire

Progress PAI6000E Manuel d'utilisateur Page 27