Progress PHN13000X Manuel d'utilisateur télécharger pdf (Page 18)

8. Clean the glass panel with water and

soap. Dry the glass panel carefully.

When the cleaning is completed, install the

glass panel and the oven door. Do the

above steps in the opposite sequence.

The screen-printing zone must face the

inner side of the door. Make sure that after

the installation the surface of the glass

panel frame on the screen-printing zones is

not rough when you touch it.

Make sure that you install the internal glass

panel in the seats correctly.

Replacing the lamp

Put a cloth on the bottom of the interior of

the appliance. It prevents damage to the

lamp glass cover and the cavity.

WARNING! Danger of

electrocution! Disconnect the

fuse before you replace the

lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

Turn the lamp glass cover

counterclockwise to remove it.

Clean the glass cover.

Replace the lamp with a suitable 300 °C

heat-resistant lamp.

Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety

chapters.

What to do if...

Problem Possible cause Remedy

The cooking zones do not

operate.

Refer to the operating instructions for the built-in cooking sur-

face.

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The fuse is blown. Make sure that the fuse is the

cause of the malfunction. If

the fuse is blown again and

again, contact a qualified

electrician.

The lamp does not operate. The lamp is defective. Replace the lamp.

18 Progress

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Progress PHN13000X Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Progress PHN13000X