Progress PAI6000E Manuel d'utilisateur télécharger pdf (Page 27)

surfaces of the worktop are to be protected

against moisture using a suitable sealant.

The sealant seals the appliance to the work

top with no gap. When building in, protect the

underside of the appliance from steam and

moisture, e.g. from a dishwasher or oven.

Avoid installing the appliance next to doors

and under windows. Otherwise hot cook-

ware may be knocked off the rings when

doors and windows are opened.

Warning! Risk of injury from electrical

current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of

voltage.

• Follow connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection by in-

stalling correctly.

• The appliance must be connected to

the electrical supply by a qualified

electrician.

Warning! Risk of injury from electrical

current.

• Loose and inappropriate plug and

socket connections can make the ter-

minal overheat.

• Have the clamping connections cor-

rectly installed by a qualified electri-

cian.

• Use strain relief clamp on cable.

• In the event of single-phase or two-

phase connection, the appropriate

mains cable of type H05BB-F Tmax

90°C (or higher) must be used.

• If this appliance’s mains cable is dam-

aged, it must be replaced by a special

cable (type H05BB-F Tmax 90°C; or

higher). The latter is available from the

Customer Care Department.

A device must be provided in the electrical

installation which allows the appliance to be

disconnected from the mains at all poles with

a contact opening width of at least 3 mm.

Suitable isolation devices include line pro-

tecting cut-outs, fuses (screw type fuses are

to be removed from the holder), earth leak-

age trips and contractors.

min. 5 mm

min.

50 mm

1

2

progress 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Commentaires sur ces manuels

Pas de commentaire