Progress PHN1220X Manuel d'utilisateur télécharger pdf (Page 14)

7. Release the locking system to remove the

internal panes of glass

8. Turn the 2 fasteners 90° and extract them

from their seats

90°

9. Carefully lift the top pane out a little and

pull out the pane which is visible on all

four sides of the frame.

1

2

Clean the oven door with lukewarm water

and a soft cloth. Do not use any scourers,

metal wool, abrasive sponges or acids which

could damage the heat reflecting special sur-

faces of the inner pane.

After cleaning the inner pane put back in the

door. Insert the door in the oven; proceed in

reverse order. Be mindful of the correct align-

ment of the panes.

To perform this operation correctly, proceed

as follows:

1. The inner pane with the frame on four

sides must be installed so that the screen

faces the outside of the oven. Touch the

visible surface. If there is no roughness on

the level of the screen, the pane is inser-

ted correctly.

2. The inner pane must be put in its place

according to figure.

After putting the panes in the oven door, se-

cure them in reverse order, following the

guidelines in Point 8 .

14 progress

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

Commentaires sur ces manuels

Pas de commentaire