Progress PAI3100F Manuel d'utilisateur télécharger pdf (Page 20)

Heat setting displays

Display Description

The cooking zone is deactivated.

The Keep Warm / STOP + GO function operates.

-

The cooking zone operates.

The cookware is incorrect or too small, or there is no cookware on the

cooking zone.

There is a malfunction.

A cooking zone is still hot (residual heat).

The Lock / The Child Safety Device operates.

The Power function operates.

The Automatic Switch-Off operates.

Residual heat indicator

Warning! The risk of burns from

residual heat!

The induction cooking zones make the heat

necessary for cooking directly in the bottom

of the cookware. The glass ceramic is hot

from the heat of the cookware.

DAILY USE

Warning! Refer to the Safety chapters.

Activation and deactivation

Touch

for 1 second to activate or deac-

tivate the appliance.

Automatic Switch Off

The function deactivates the appliance

automatically if:

•

All cooking zones are deactivated (

).

• You do not set the heat setting after you

activate the appliance.

• You spill something or put something on

the control panel for more than 10 sec-

onds, (a pan, a cloth, etc.). An acoustic

signal sounds some time and the appli-

ance deactivates. Remove the object or

clean the control panel.

• The appliance becomes too hot (e.g.

when, a saucepan boils dry). Before you

use the appliance again, the cooking

zone must be cool.

• You use incorrect cookware. The symbol

comes on and the cooking zone de-

activates automatically after 2 minutes.

• You do not deactivate a cooking zone or

change the heat setting. After some time

comes on and the appliance deacti-

vates. See below.

• The relation between heat setting and

times of the Automatic Switch Off func-

tion:

•

, - — 6 hours

•

- — 5 hours

•

— 4 hours

•

- — 1.5 hours

The heat setting

Touch

to increase the heat setting.

Touch

to decrease the heat setting. The

display shows the heat setting. Touch

and at the same time to deactivate the

cooking zone.

Power function

The Power function makes more power

available to the induction cooking zones.

The Power function can be activated for a

limited period of time ( see Technical Infor-

mation chapter). After that, the induction

cooking zone automatically sets back to

highest heat setting. To activate, touch

,

comes on. To deactivate, change the

heat setting.

Power management

The power management divides the power

between two cooking zones in a pair (see

the illustration). The power function increa-

20 progress

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Commentaires sur ces manuels

Pas de commentaire